Microphones

A rugged headband microphone with dynamic capsule. The unit comes fitted with a 3.5 mm mono jack. A 6.35 mm mono adaptor and wind sock are also supplied.

Alctron iOS Microphone

The Plena PLE-2CS 2 zone paging microphone is a high-quality call station with a sturdy metal base designed for use with the PLE series of amplifiers such as the Bosch PLE-2MA120 and PLE-2MA240.

An external PSU for use with CPM microphones, required if more than one microphone is used.

High Quality Black Fabric Microphone Stand Carry Bag With 2 Strap Handles and Zipper

Black Stage Kick Drum Microphone Stand

Table/desk microphone stand with heavy cast base and chrome stem. All metal with 3/8 and 5/8 fittings.

Mini Chrome desk/table microphone stand with tripod legs made from metal with a chrome finish.

A black, table or desk microphone stand with angle and height adjustment.

Microphone stand with extending, height adjustable chromed steel stem and a heavy, black cast iron base. The desk microphone features 3/8 and 5/8 fittings.

Black Microphone Desk Stand

This short microphone stand with a tripod base is designed for mounting lightweight microphones and is supplied with a microphone clip. The microphone stand allows you to mount most microphones on any flat surface which can make it easier to pick up sound and improves quality.

Easy to use, these clip-on rim mount microphone holders are ideal to get close microphoning without the hassle of transporting and positioning separate microphone stands. Featuring adjustable height and swivel settings. Priced and supplied in a pair.

A metal, high quality table microphone stand with boom. Features adjustment for height and reach, finished in black and silver.

A table stand for use with G185C and G185HA microphones. Connections are via XLR.

Table microphone stand for electret microphones featuring a heavy duty die cast base with anti slip rubber pads. Requires 2x AA batteries.

Metal microphone desk stand with detachable 203 mm gooseneck, finished in black and chrome.

This metal microphone stand accessory fits onto most mic stands to allow two mics to be used on one stand. All metal construction.

A useful microphone holder with the ability to be clamped onto any suitable surface up to 25 mm thick, comes with a reversible thread adapter. Made from metal.

A plastic 25 mm microphone holder for wall mounting.

Eliminates popping sounds when recording. Spring loaded clip fits most mic stands.

This metal microphone stand accessory fits onto most mic stands to allow two mics to be used on one stand. All metal construction.

SoundLAB black pop shield with adjustable clip.

Microphone foam windshield with an internal opening of 35x60 mm.

Black foam windshield.

Black foam windshield. Pack of 3.

Black foam windshield. Pack of 3.

Coloured foam windshield. Priced and sold in packs of 5.

Black 5mm foam windshield.

Black 7 mm foam windshield.

Black 7 mm foam windshield.

Black 5 mm foam windshield.

Black 10 mm foam windshield.

Black 10 mm foam windshield.

Black 10 mm foam windshield.

Clamp-on microphone bar. Clamps onto mic stand up to 30 mm diameter. Matt black steel construction.

Gooseneck in chrome finish with standard male and female 5/8 x 27tpi threads.

Gooseneck in chrome finish with standard male and female 5/8 x 27tpi threads.

Gooseneck in chrome finish with standard male and female 5/8 x 27tpi threads.

Gooseneck in chrome finish with standard male and female 5/8 x 27tpi threads.

Gooseneck in chrome finish with standard male and female 5/8 x 27tpi threads.

Gooseneck in chrome finish with standard male and female 5/8 x 27tpi threads.

Gooseneck in chrome finish with standard male and female 5/8 x 27tpi threads.

Gooseneck base with standard 5/8 x 27tpi thread to take any Soundlab gooseneck.

Gooseneck base with standard 5/8 x 27tpi thread to take any Soundlab gooseneck.

Gooseneck base in black finish with standard 5/8 x 27tpi thread to take any Soundlab gooseneck

A useful table fixing gooseneck base; fits table up to 40 mm. Features a hand tightening knob.

Central mic holder suspended by 8 elasticated bands on steel frame. Will hold dynamic mics in any position. Standard fitting.

Plastic mic holder with standard thread; the mic simply slides in and is held securely. Featuring swivel adjustment. High quality hard plastic.

A standard fitting unit with spring loaded jaws in black plastic.

A plastic microphone holder, suitable for Radio microphones.

Microphone holder for standard studio microphones (45 mm/2). With standard anti-vibration features for improved quality.

Microphone holder for use with most snare drum microphones.

This clever Camera/Camcorder Stand Adaptor can be easily mounted onto most music stands. The angle can be adjusted by 360 degrees and it has a maximum capacity of 5 kg. Thread size 5/8 27 TPI

A plastic microphone holder, suitable for electret microphones. With 3/8 B.S.W. and 5/8 27tpi adaptors. High quality soft plastic.

A 20 mm diameter microphone holder in affordable black plastic, suitable for electret microphones. With 5/8 fitting. Economy soft plastic.

A black, plastic microphone holder with 28 mm diameter suitable for electret microphones. Will accommodate both 9.5 mm (3/8) and 15.9 mm (5/8) fittings.

A black plastic microphone holder with 28 mm diameter. Suitable for most dynamic microphones. With 5/8 fitting.

A brass threaded adaptor for mic stands. Internal thread: 3/8 Whitworth (B.S.W.) female. External thread: 5/8 27TPI male.

A steel threaded adaptor for mic stands, with 5/8 27tpi male and female threads, and 3/8 B.S.W. male threads.

A steel threaded adaptor for mic stands. Internal thread: 3/8 Whitworth (B.S.W.) female. External thread: 5/8 27TPI male.

Professional microphone matching transformer built into XLR female plug with short lead to all-metal jack plug. Mu-metal screened transformer. Impedance selector switch for low/high input.

A set of five black foam windshields, suitable for most dynamic microphones. Priced and sold in bags of 5.

A set of 5 black foam windshields, suitable for most electret condenser mics. Price and sold in bags of 5.

Electret condenser microphone insert with 2 contacts and a DC Voltage range of 1-10 V.

Electret condenser microphone insert with 2 contacts and a DC Voltage range of 1-10 V.

Soundlab Dynamic Premium Vocal Microphone Kit with 3 Microphones, Leads and Carry Case

Soundlab Dynamic Vocal Microphone Kit with 3 Plastic Microphones, Leads and Carry Case

SoundLAB Case for 3 Microphones and 3 Holders

A well designed studio sound isolation screen which can be stand alone or can fit onto most stands that have tube diameter from OD 15mm to OD 28mm. A feature of this screen is that the left and right panels can be adjusted to give the best sound protection and as a result improves voice recording quality.

SoundLab Studio Microphone Reflexion Screen

The karaoke microphone, available in several fun colours, is ideal for both home and karaoke party use. This home karaoke microphone is made with a robust but lightweight plastic case. It offers good sound reproduction and features a dynamic capsule perfect for vocals, 6.35mm mono jack plug and a built-in anti-tangle lead

The karaoke microphone, available in several fun colours, is ideal for both home and karaoke party use. This home karaoke microphone is made with a robust but lightweight plastic case. It offers good sound reproduction and features a dynamic capsule perfect for vocals, 6.35mm mono jack plug and a built-in anti-tangle lead

The karaoke microphone, available in several fun colours, is ideal for both home and karaoke party use. This home karaoke microphone is made with a robust but lightweight plastic case. It offers good sound reproduction and features a dynamic capsule perfect for vocals, 6.35mm mono jack plug and a built-in anti-tangle lead

The karaoke microphone, available in several fun colours, is ideal for both home and karaoke party use. This home karaoke microphone is made with a robust but lightweight plastic case. It offers good sound reproduction and features a dynamic capsule perfect for vocals, 3.5mm mono jack plug and a built-in anti-tangle lead

Mr Entertainer Switched Plastic Bodied Vocal Microphone complete with 3 m XLR to Jack Lead

Mr Entertainer Switched Plastic Bodied Vocal Microphone complete with 3 m XLR to Jack Lead

Mr Entertainer Switched Plastic Bodied Vocal Microphone complete with 3 m XLR socket to Mono Jack plug Lead.

Mr Entertainer Dynamic Vocal Microphone with LED Lights

Mr Entertainer Dynamic Vocal Microphone with LED Lights

Replacement Microphone Mesh for G158D in silver colour finish.

Dynamic Mic and XLR lead in a plastic case.

The great quality dynamic microphone for karaoke and home users features a robust metal body, high quality dynamic capsule, on/off switch and connecting lead.

Dynamic vocal microphone featuring robust metal body, high quality dynamic capsule, on/off switch and connecting lead.

The professional dynamic microphone for vocals has contemporary styling, high quality dynamic capsule for rich bass performance, robust metal body and ribbed on/off switch. Supplied with a 3 m XLR-Jack lead.

Digital condenser microphone with tripod stand and volume control, ideal for internet chat, network recording, network singing, network video conference etc. It provides superior clarity with the simplicity of a single plug-and-play connection, filtering out unwanted background noise.